A SERVICE OF

logo

Startup Problems 159
E-EQ-MX3RG-J-ARC MX3 Reference Guide
Copy File
12. When the DOS prompt appears, type
SYS C:
and press <Enter>.
13. Type
Type C:\AUTOEXEC.BAT
and press <Enter>.
If your AUTOEXEC.BAT file contains a COMSPEC command, confirm that it
identifies the correct location for COMMAND.COM (i.e. the C:\ directory).
Please refer to commercially available DOS User’s Guides
for complete instructions or troubleshooting when using these
DOS files or commands.
14. Type
Type C:\CONFIG.SYS
and press <Enter>.
If your CONFIG.SYS file contains a SHELL command, confirm that it
identifies the correct location for COMMAND.COM (the C:\ directory).
15. Power off the MX3.
16. Remove the DOS boot SRAM card.
17. Replace the PC card cover.
18. Power on the MX3.