A SERVICE OF

logo

Open as PDF
next previous
System Utilities 6-9
MX2A137REFGD Revision A MX2 Reference Guide
VDISK.SYS
This driver configures all of the unit’s available extended memory as a
read/write disk, called a RAM disk. This driver is located on drive B of
the MX2 and is loaded by the CONFIG.SYS file located on that drive.
You cannot configure the parameters for this driver.
XFER.EXE
The XFER utility gives you the ability to transfer files to and from a PC
through the MX2’s serial port. For complete information about XFER,
see Chapter 5 “Using XFER.”