38 Geac System21 commerce.connect: Implementation on the iSeries Server
5. On each display, press F15 to authorize the user to all options on that menu.
6. After all displays are presented, press F12 to return to the main user profile maintenance
display.
7. Select F19 and type 1 next to the OM 03 application. Press Enter.
8. Type 1 next to all companies that are valid for this user. Press Enter.
For more information, see Chapter 1 in the Geac System21
Administration Functions Active
Enterprise Framework
manual.
Setting up an operator
This section explains how to set up an operator. It assumes that the user is authorized to the
OM menus as explained earlier and that the OM company profile is already configured.
1. Sign on to the iSeries server using the profile OMUSER.
2. Enter the command:
AM3
3. On the Option line, enter:
/OMM
This displays the OMM menu.
4. On the OMM menu, select option 1.
5. Add or maintain the operator codes as required. Now all users should have an iSeries
profile, an XML profile, and a System21 profile. They should also be set up as operators.
Figure 3-10 shows an example display of setting up an operator profile.
Figure 3-10 Operator setup display
For more information, see the
System21 Setup for call.connect
manual.
