Instruction Manual PSB-1401
9
Group 2 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags C and D.
2. Remove the Nylon spacers from parts bag D.
3. Place the Nylon spacers over the four mounting holes on
your Large Flat Panel display (see Figure 9).
4. Place the interface brackets over the Nylon spacers (see
Figure 9 and Figure 10).
5. Select parts bag C.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware in parts bag C, attach the interface
bracket to the display using the holes that line up with
your Large Flat Panel display mounting holes (see Figure
9 and Figure 10). Do not overtighten the mounting screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag C M4 x 30mm Phillips Head Cap Screw 4
Parts Bag D Nylon Spacer .50” OD x .285” ID x .625” 4
Figure 9. Spacer Installation for Group 2
Figure 10. Bracket Attachment for Group 2
