8
Instruction Manual PSB-1401
DETERMINE BRACKET INSTALLATION PROCEDURES
Group 1 Installation Procedures
Remove Mounting Buttons
1. Using a Phillips screwdriver, remove the four mounting
buttons attached to the back of your Large Flat Panel dis-
play (see Figure 6).
2. Retain or discard the four mounting buttons and attaching
hardware at your discretion.
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags D and G.
2. Remove Nylon spacers from parts bag D.
3. Place the Nylon spacers over the mounting holes on your
Large Flat Panel display (see Figure 7).
4. Place the interface brackets over the Nylon spacers (see
Figure 7 and Figure 8).
5. Select parts bag G.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware in parts bag G, attach the interface
bracket to your Large Flat Panel display using the holes
that line up with your Large Flat Panel display mounting
holes (see Figure 7 and Figure 8). Do not overtighten the
mounting screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag D Nylon Spacer .50” OD x .285” ID x .625” 4
Parts Bag G M5 x 25mm Phillips Head Cap Screw 6
Figure 6. Remove Sony Mounting Buttons
Figure 7. Spacer Installation for Group 1
Figure 8. Bracket Attachment for Group 1
