18
Instruction Manual PSB-1401
Group 11 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags B and F.
2. Remove the Nylon spacers from parts bag B.
3. Place the four Nylon spacers over the mounting holes on
your Large Flat Panel display (see Figure 32).
4. Place the interface brackets over the Nylon spacers (see
Figure 32 and Figure 33).
5. Select parts bags F.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware in parts bag F, secure the interface
brackets to your Large Flat Panel display (see Figure 32
and Figure 33). Do not overtighten the mounting screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag B Nylon Spacer .75” OD x .26” ID x .375” 12
Parts Bag F M5 x 20mm Phillips Head Cap Screw 4
Figure 32. Spacer Installation for Group 11
Figure 33. Spacer Location for Group 11
ATTACH MOUNTING
BRACKETS USING
THESE HOLES
