Instruction Manual PSB-1401
21
Group 14 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags B and F.
2. Remove the Nylon spacers from parts bag B.
3. Place the Nylon spacers over the 12 mounting holes on
your display (see Figure 38).
4. Place the interface brackets over the Nylon spacers (see
Figure 39 and Figure 42).
5. Select parts bag F.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware from parts bag F, attach the interface
brackets to your Large Flat Panel display (see
Figure 39 and Figure 40). Do not overtighten the mounting
screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag B Nylon Spacer .75” OD x .26” ID x .375” 12
Parts Bag F M5 x 20mm Phillips Head Cap Screw 4
Figure 38. Spacer Location for Group 14
Figure 39. Spacer Installation for Group 14
ATTACH MOUNTING
BRACKETS USING
THESE HOLES
Figure 42. Bracket Attachment for Group 14
