16
Instruction Manual PSB-1401
Group 9 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags B and C.
2. Remove the Nylon spacers from parts bag B.
3. Place two Nylon spacers over each of the four mounting
holes on your Large Flat Panel display (see Figure 28).
4. Place the interface brackets over the Nylon spacers (see
Figure 28 and Figure 29).
5. Select parts bag C.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware from parts bag C, attach the interface
brackets to your Large Flat Panel display (Figure 28 and
Figure 29). Do not overtighten the mounting screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag B Nylon Spacer .75” OD x .26” ID x .375” 12
Parts Bag C M4 x 30mm Phillips Head Cap Screw 4
ATTACH MOUNTING
BRACKETS USING
THESE HOLES
Figure 28. Spacer Installation for Group 9
Figure 29. Bracket Attachment for Group 9
