Instruction Manual PSB-1401
19
Group 12 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags D and E.
2. Remove the Nylon spacers from parts bag D.
3. Place the Nylon spacers over the four mounting holes on
your Large Flat Panel display (see Figure 34).
4. Place the interface brackets over the Nylon spacers (see
Figure 34 and Figure 35).
5. Select parts bag E.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware from parts bag E, attach the interface
brackets to your Large Flat Panel display (Figure 34 and
Figure 35). Do not overtighten the mounting screws.
ATTACH MOUNTING
BRACKETS USING
THESE HOLES
Figure 34. Spacer Installation for Group 12
Figure 35. Spacer Location for Group 12
