12
Instruction Manual PSB-1401
Group 5 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags B and H.
2. Remove the Nylon spacers from parts bag B.
3. Place the four Nylon spacers over the mounting holes on
your Large Flat Panel display (see Figure 16).
4. Place the interface brackets over the Nylon spacers (see
Figure 17).
5. Select parts bag H.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the M6x20mm screws in parts bag H, attach the
interface brackets to your Large Flat Panel display. Do not
overtighten the mounting screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag B Nylon Spacer .75” OD x .26” ID x .375” 12
Parts Bag H M6 x 20mm Phillips Head Cap Screw 6
Figure 16. Spacer Installation for Group 5
Figure 17. Bracket Attachment for Group 5
