Filter
Top Products
26
Electrical Connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
1 WARNING – THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
these safety measures not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the
appliance rating plate.
The appliance is supplied with a 13 amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13 amp ASTA approved (BS 1362) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accord-
ance with the following code:
• The wire coloured green and yellow must be con-
nected to the terminal marked with the letter “E“ or
by the earth symbol E or coloured green and yel-
low.
• The wire coloured blue must be connected to the
terminal “N“ or coloured black.
• The wire coloured brown must be connected to the
terminal marked “L“ or coloured red.
• Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must
be secure over the outer sheath.
1 WARNING! A cut off plug inserted into a
13 amp socket is a serious safety (shock) haz-
ard. Ensure that the cut off plug is disposed of
safely.
Green and Yellow: Earth
Blue: Neutral
Brown: Live