Filter
Top Products
10
Adding detergent /
conditioner
Important: Only use detergents/conditioners that
are suitable for use in household washing machines.
Add detergent/conditioner in accordance with the
detergent/conditioner manufacturer’s instructions.
Observe instructions on the packaging.
The amount of detergent used depends on:
– the degree of soiling,
– the load size
– the hardness of the tap water.
• If the manufacturer does not make any recommen-
dations with regard to small volumes of washing:
For a half-load use a third less, and for a very small
load use only the half the amount of detergent that
is recommended for a full load.
• Water softener should be used from water hard-
ness range 2 (=medium). The amount of detergent
used can then always be that as for hardness
range 1 (=soft). Your local water company will pro-
vide you with information about water hardness in
your area.
1.Pull out the detergent drawer as far as it will go.
2.Add the detergent/conditioner.
3.Push the detergent drawer in fully.
Washing powder/tablets for the main wash cycle
If you are using water softener and require the right
compartment for detergent for the pre-wash cycle,
add the water softener on top of the detergent for the
main wash cycle in the left compartment.
Softener, wash-care products to preserve the
shape of garments, starch
Fill the compartment to no more than the MAX indi-
cator. Add water to thick liquid concentrates in ac-
cordance with the manufacturer’s instructions before
using them. Dissolve powder starch.
If you are using liquid detergent:
Add liquid detergent using measuring containers
provided by the detergent manufacturer.
Stain removal agent/stain re-
moval tablets
Washing powder/tablets
for the main wash cycle
Conditioner/Wash-care products
to preserve the shape of gar-
ments/Starch
Washing powder/tablets
for the pre wash cycle
or water softener