Whirlpool 3397617 Clothes Dryer User Manual


 
If dryer does not
operate properly.. .
If dryer will not operate, check the
following to be sure that:
A. Electrical supply is connected,
B. House fuses are intact and tight or
circuit breakers have not tripped,
C. Door is closed.
D. Controls are set in an on position,
E. Start button has been pushed firmly
Part No. 3397617
01995
When moving
your dryer.. . -
l
Shut off electrical supply to dryer.
l
Disconnect power supply cord and
tape it securely to dryer.
l
Tape the drum to the front panel.
l
Tape the dryer door and lint screen.
l
Turn leveling legs all the way in.
SLIDE DRYER ONTO CARDBOARD OR
HARDBOARD BEFORE MOVING ACROSS
FLOOR TO AVOID DAMAGE TO FLOOR
COVERING.
Before having your electric dryer
installed in your new home, check with
a licensed electrician to confirm that
the supply voltage matches the
voltage specified on the model/serial
rating plate.
Benton Harbor, Michigan 49022
If you need
assistance...
If you need assistance, call the
Whirlpool Consumer Assistance Center
telephone number. Dial toll-free from
anywhere in the U.S.A.:
l-800-253- 130 1
Talk with one of our trained consultants,
You can also call the dealer where you
bought your dryer.
I
I
Outside the U. S. call the dealer where
you bought your dryer.
When you call, you will need the dryer
model number and serial number. Both
numbers are on the model/serial rating
plate located in the door well behind
dryer door and on front of opening.
I
\
\ model/serial
rating plate
(bottom lefl
hand corner)
Printed in U.S.A.