Filter
Top Products
Top-up rinse for COTTONS
When this is activated, additional wa
-
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic
drainage pipes.
Top-up rinse takes place when
temperatures of 95°C and 75°C are
selected.
Top-up rinse should be activated:
–
to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse for COTTONS de-
activated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The drum door is closed.
–
The programme selector is at
Finish
.
APress the START button and keep it
pressed in whilst carrying out steps
B to C.
BSwitch the machine on with the
I-ON/0-OFF button.
CWait until the START indicator light
comes on . . .
D. . . and then release the START
button.
ETurn the programme selector to the
COTTONS 40°C position:
A P will flash in the display alternating
with the number 0 or 1.
0 = Top-up rinse is deactivated
1 = Top-up rinse is activated
FPress the START button to change
from one to the other. The display will
change accordingly from 0 to 1 or
from 1 to 0.
GSwitch the washing machine off with
the I-ON/0-OFF button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
67