Filter
Top Products
The programmable functions can be
used to tailor washing programmes to
suit your individual requirements.
The programmable functions are
activated with the help of the START
button and the programme selector.
Water plus system
Selecting the
Water plus
additional
option increases the water intake in
the programmes listed below.
The water intake is increased in the
wash and rinse stages and in the
COTTONS and MINIMUM IRON
programmes an extra rinse cycle is
introduced.
There are four different settings which
can be programmed to alter the water
intake for the following programmes:
– COTTONS
– MINIMUM IRON
–
Quick wash
–
Mixed wash
–
Silks
The programmed setting is then
activated by pressing the
Water plus
additional option button.
The settings are as follows:
Setting 1:
an increase in the rinse water level for
the programmes listed.
Setting 2:
an increase in the water level in the
main wash and
rinses for the
programmes listed (the washing
machine is delivered with setting 2
programmed as standard).
Setting 3:
an extra rinse cycle in the COTTONS
and MINIMUM IRON programmes.
Setting 4:
an increase in the water level in the
main wash and
rinses for the
programmes listed and
also an extra
rinse cycle in the COTTONS and
MINIMUM IRON programmes. This
setting should be programmed in if
laundry is too hard after drying and if
someone in the household suffers from
a detergent allergy.
Steps A to G on the following page
describe how to programme and store
a setting in memory.
Programmable functions
64