Filter
Top Products
Follow steps A to G to programme
and store a setting in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The drum door is closed.
–
The programme selector is at
Finish
.
APress the START button and keep it
pressed in whilst carrying out steps
B to C.
BSwitch the machine on with the
I-ON/0-OFF button.
CWait until the START indicator light
comes on . . .
D. . . and then release the START
button.
ETurn the programme selector to the
COTTONS 75°C position:
A P will flash in the display alternating
with the number 1, 2, 3 or 4.
FEach subsequent press on the
START button selects a different
setting.
The number alternating with the P in
the display refers to the settings as
follows:
1 = Setting 1
is selected
(increased water level in the
rinses)
2 = Setting 2
is selected
(increased water level in the main
wash and in the rinses)
3 = Setting 3
is selected
(extra rinse in the COTTONS and
MINIMUM IRON programmes)
4 = Setting 4
is selected
(increase in the water level in the
main wash and rinses and also an
extra rinse in the COTTONS and
MINIMUM IRON programmes).
GSwitch the washing machine off with
the I-ON/0-OFF button.
The
Water plus
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
65