Filter
Top Products
Important control panel
features
Programme selector
The programme selector is used to set
the basic wash programme and the
temperature for that programme.
The light ring will go out a few minutes
after the end of the programme to save
energy.
Additional option buttons
Additional options can be added to the
basic programme.
Use the top button to select either the
Short
, the
Pre-wash
or the
Soak
option.
Use the lower button to select the Water
plus option. The indicator light will
come on to show that the additional op-
tion has been selected. If an additional
option is chosen, which is incompatible
with the basic programme, it cannot be
selected.
"Spin" button with indicator lights
Select the spin speed
The maximum spin speed which can be
selected depends on the basic
programme chosen.
Maximum
spin
speed
Basic programme
1600 COTTONS, Quick wash, Starch,
Drain/spin
1200 WOOLLENS, Separate rinse
900 MINIMUM IRON, Mixed wash
600 DELICATES
400 Silks
Press the "Spin" button to select a differ
-
ent spin speed. However, you cannot
select a spin speed higher than the
maximum allowed for the basic wash
programme chosen.
The indicator lights show the speed se
-
lected.
You can also omit the final spin.
^
Press the "Spin" button to reach:
–
Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme. To continue the
programme select a spin speed. The
water will drain out and the laundry is
given a final spin. When the
programme is finished the "Anti-
crease/Finish" light will come on. Turn
the programme selector to the "Fin-
ish" position and press the
door
but
-
ton to open the door and remove the
laundry.
–
Without final spin
The laundry is not spun after the final
rinse but the water is drained away
and the machine goes straight into
the anti-crease stage. Spinning be
-
tween the rinses is also omitted in
this setting.
Description of the appliance
12