Filter
Top Products
With the help of the following notes minor faults in the performance of the appli
-
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a suit
-
ably qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The man
-
ufacturer cannot be held liable for unauthorised work.
The chart is divided into the following sections to help you:
–
The programme does not start.
–
The wash programme stops and a fault indicator light comes on.
–
A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
– The drum door cannot be opened by pressing the Door button.
The programme does not start.
Fault indicator Possible cause Remedy
The Anti-crease/Finish
indicator light is not on,
or the START indicator
light is not flashing.
There is no power.
Check that
–
the mains plug is
plugged in.
–
the fuse or circuit
breaker has not trip
-
ped.
The check light locked
is flashing.
The system lock has been
activated.
Deactivate the system
lock.
The programme does
not start when Drain/Fi
-
nal spin has been se
-
lected.
The washing machine has
not been prepared for us
-
ing for the first time.
Prepare the machine as
described in "Before us
-
ing for the first time".
Problem solving guide
39