Filter
Top Products
Before using the machine for the first
time ensure that it is correctly in
-
stalled and connected. See the rele
-
vant section under "Installation".
Also check that the fluff filter is se
-
curely tightened. Otherwise there is
a risk of water leakage during use.
For safety reasons spinning is not pos
-
sible until the machine has been pre
-
pared for using for the first time. To acti
-
vate the spinning function you must run
a wash programme without laundry
and
without detergent
.
Using detergent could result in an ex-
cessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
^ Turn on the stopcock.
^
Press the I-ON/0-OFF button in.
^
Turn the programme selector to
COTTONS 40°C.
^
Press the "Spin" button repeatedly to
select
Without spin
.
^
Press START.
When this programme has finished turn
the programme selector to
Finish
. Your
washing machine is ready for using for
the first time.
Before using for the first time
13