Filter
Top Products
The programmable functions can be
used to tailor washing programmes to
suit your individual requirements.
Water plus system
Selecting the
Water plus
additional
option increases the water intake in
the programmes listed below.
The water intake is increased in the
wash and rinse stages and in the
COTTONS programme an extra rinse
cycle is introduced.
There are four different settings which
can be programmed to alter the water
intake for the following programmes:
– COTTONS
– MINIMUM IRON
– Quick wash
– Mixed wash
– Silks
The programmed setting is then acti
-
vated by pressing the
Water plus
addi
-
tional option button.
The settings are as follows:
Setting 1:
an increase in the rinse water level for
the programmes listed (except for
Silks).
Setting 2:
an increase in the water level in the
main wash and
rinses for the
programmes listed (the washing ma
-
chine is delivered with setting 2 pro
-
grammed as standard).
Setting 3:
an extra rinse cycle in the COTTONS
programme only
.
Setting 4:
an increase in the water level in the
main wash and rinses for the
programmes listed and also an extra
rinse cycle in the COTTONS
programme. This setting should be pro-
grammed in if laundry is too hard after
drying and if someone in the household
suffers from a detergent allergy.
Steps A to G on the following page
describe how to programme and store
a setting in memory.
Programmable functions
62