Filter
Top Products
Memory function
If an additional option(s) is selected
for a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the display will show the
additional option(s) and / or spin speed
which have been stored for that
programme in the memory.
The washing machine is delivered with
the memory function deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at
Finish
.
APress the START button and keep it
pressed in whilst carrying out steps
B to C.
BSwitch the machine on with the
I-ON/0-OFF button.
CWait until the START indicator light
comes on . . .
D. . . and then release the START
button.
ETurn the programme selector to the
COTTONS 30°C position:
If the
Soak/Pre-wash
sequence
indicator light:
does not flash = the Memory func-
tion has not been
activated.
flashes = the Memory
function is
activated.
FPress the START button to activate or
deactivate the Memory function
option.
GSwitch the machine off with the
I-ON/0-OFF button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
64