Follow steps A to G to programme
and store a setting in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The machine is properly closed.
–
The programme selector is at
Finish
.
APress the START button and keep it
pressed in whilst carrying out steps
B to C.
BSwitch the machine on with the
I-ON/0-OFF button.
CWait until the START indicator light
comes on . . .
D. . . and then release the START
button.
ETurn the programme selector to the
COTTONS 75°C position:
The
Soak/Pre-wash
sequence
indicator light will briefly flash twice in
2 second intervals, to show that
factory Setting 2 is stored in memory.
FEach subsequent press on the
START button selects a different
setting.
The
Soak/Pre-wash
sequence indicator
light will flash:
–
x 1 = Setting 1
higher rinse water level selected
– x 2 = Setting 2
higher water level in the main wash
and rinses (factory setting)
– x 3 = Setting 3
extra rinse in the
COTTONS programme
– x 4 = Setting 4
higher water level in the main wash
and rinses and an extra rinse in the
COTTONS programme
GSwitch the washing machine off with
the I-ON/0-OFF button.
The
Water plus
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
61