Filter
Top Products
Changing the program sequence
To cancel a program:
^
Turn the Program Selector to the
“Finish/Start” position.
To interrupt a program:
^
Turn the machine off. To re-start a
program, turn the machine on again.
To change an incorrectly se
-
lected program:
^
Turn the Program Selector to
“Finish/Start”. When only the “On”
LED is lit, a new program can be se
-
lected.
To change a program when the Child
Safety Feature has been set, see Pro-
grammable functions”.
During operation, it is possible to:
–
manually omit one or more program
stages
or
–
manually repeat one or more pro
-
gram stages.
To omit a program stage:
^
Turn the Program Selector to
“Finish/Start”.
As soon as the program sequence indi
-
cator lamp for the stage you wish stops
flashing:
^ turn the Program Selector to the de-
sired program.
To repeat a program stage:
a program stage must end before it can
be repeated:
^ Turn the Program Selector to
“Finish/Start”.
When only the “On” LED is illuminated:
^
Re-select the program.
^
After approx. 5 seconds, turn the
Program Selector back to “Fin
-
ish/Start”.
Once the sequence indicator lamp for
the stage you wish to repeat starts
flashing:
turn the Program Selector to the de
-
sired program within 3 seconds.
Changing the program sequence
19