Filter
Top Products
Programmable functions
The following additional functions can
be programmed into the machine if de
-
sired:
A High water level (only in
“Cottons” rinses).
Where rinse results are particularly im
-
portant.(e.g. Soap allergies)
B 5th Rinse in the “Cottons”
program.
For soft water areas (up to 135 ppm
calcium carbonate).
In soft water areas, a higher water level
can be selected in addition to a 5th
rinse cycle, if required.
C Program Lock
(Child safety feature)
When activated, the washing machine
will ignore any changes made after the
first three minutes of operation. For ex
-
ample if the Program Selector is moved
to a different setting or an additional
function is selected, after the first three
minutes, the “On” lamp will flash, notify
-
ing you that the Child Safety Feature
has been activated. The program will,
however continue uninterrupted. This
prevents children from inadvertently
changing or stopping a wash program
by playing with the dials.
If the Program Selector is turned to its
original position, the “On” lamp will stop
flashing.
To change a program once the Pro-
gram lock is activated:
^ Turn the Program Selector to “Fin-
ish/Start”.
After about 30 seconds, the sequence
indicator lamps will start flashing in suc
-
cession. A new program can be se
-
lected as soon as the “On” lamp is the
only one remaining lit.
The three functions described
above can be programmed by the
owner using the steps shown on the
following pages.
35
Programmable functions