Filter
Top Products
The „Pre-wash“ indicator
flashes
^
Start the program again.
If the indicator still flashes, call the
Miele Technical Service Department.
The „Main wash“ indicator
flashes during, or after the end
of a program
If this occurs again during the next pro
-
gram,call the Miele Service Depart
-
ment.
Despite adequate water supply
pressure, the machine takes a
long time to fill
Clean the filters in the water inlet sys-
tem (see „Cleaning and Care“).
Large amounts of unused de
-
tergent remain in the dis
-
penser drawer
The water supply pressure is too low.
^
Clean the filters (see „Cleaning and
Care“).
^
Select the „Water plus“ function if
necessary.
^
If using a water softener, pour the de
-
tergent into the dispenser before
adding the water softener.
Fabric softener is not com-
pletely dispensed or water re-
mains in the p compartment
The dispenser drawer was opened
while the fabric softener was being
flushed in, or
The siphon tube is incorrectly posi-
tioned or clogged. Clean it (see
„Cleaning and Care“).
Problem solving guide
25