Filter
Top Products
Installation
Levelling the machine
The machine must be level to ensure
smooth operation. Check with a spirit
level.
The feet are adjusted using the leg le-
vellers as follows:
Note: All 4 legs have counternuts.
Shorten front left leg until the ma-
chine stands on 3 legs only; push
machine diagonally to be sure that
machine is standing on 3 legs only.
Use a level to check levelling of ma-
chine in both directions as shown
above.
Adjust the 3 legs in use until a level
position is attained. Turn the counter-
nuts upright and tighten them
against bottom of machine.
Lower the front left leg to make firm
contact with the floor, turn the
counternut upward and tighten.
Check levelling of machine by push-
ing and pulling diagonally on top of
machine casing. The same stiffness
should be felt in both directions.
Installation
37