Filter
Top Products
Programmable options
Additional options can be programmed
into the machine if desired:
A High water level (only in
“Cottons” rinses)
Where rinse results are particularly im-
portant (e.g. Soap allergies).
B 5th Rinse in the “Cottons”
programme
For soft water areas (up to 135 ppm).
In soft water areas a higher water level
can be selected in addition to a 5th
rinse cycle, if required.
C Programme Lock
(Child safety feature)
When activated, the washing machine
will ignore any changes made after the
first three minutes of operation. For
example, if the programme selector
switch is moved to a different setting or
an additional option is selected, the
“On” lamp will flash, notifying you that
the Child safety feature has been acti-
vated, but the programme will continue
uninterrupted. This prevents children
from inadvertently changing or stop-
ping a wash programme by playing
with the dials.
If the programme selector switch is
turned to its original position, the “On”
lamp will stop flashing.
To change a programme:
Turn the programme selector switch
to “Start/Finish”.
The sequence indicator lamps will start
flashing in succession after about 30
seconds. A new programme can be se-
lected as soon as the “On” lamp is the
only one remaining lit.
The three options described above
can be programmed by the Cus-
tomer using the steps shown on
pages 22-23.
There are other programmable func-
tions which are reserved for Miele
Service Engineers. They are not nor-
mally activated and require access
to internal machine components. In
areas with low water pressure, the
machine can be adjusted such that
a programme interruption due to
low water pressure will occur after 6
minutes rather than after 4 minutes.
In areas with extremely hard water
(above 400 ppm CaCO
3
) such that
the capacity of compartment j is
insufficient for the amount of deter-
gent needed, the machine can be
adjusted to take water and deter-
gent in through compartment i in
the main wash.
Programmable options
21