Filter
Top Products
Changing the programme sequence
Selecting a programme
A programme can only be started
when:
The machine is turned on.
The drum door is properly shut.
The programme selector switch is at
the “Start/Finish” position.
Turn the programme selector switch to
the desired programme to begin.
To cancel a programme:
Turn the programme selector switch
to the “Start/Finish” position.
To interrupt a programme:
Turn the machine off. To re-start a
programme, turn the machine on
again.
To change an incorrectly se-
lected programme:
Turn the programme selector switch
to “Start/Finish”. When only the “On”
LED is illuminated, a new pro-
gramme can be selected.
To change a programme where the
child safety option has been set, see
page 19.
During operation, it is possible to:
– omit one or more programme stages
or
– repeat one or more programme
stages.
To omit a programme stage:
A programme stage must first be
reached to be omitted. When the PRO-
GRAMME SEQUENCE indicator lamp
indicates the stage to be omitted:
Turn the programme selector to
“Start/Finish”.
As soon as the PROGRAMME SE-
QUENCE indicator lamp for the stage
at which you wish to continue starts
flashing:
turn the programme selector switch
to the appropriate programme.
To repeat a programme stage:
A programme stage must have finished
before it can be repeated. When the
PROGRAMME SEQUENCE indicator
lamp indicates the stage after the one
to be repeated:
Turn the programme selector switch
to “Start/Finish”.
When only the “On” LED is illuminated:
select a programme.
After approx. 5 seconds, turn the pro-
gramme selector switch back to
“Start/Finish”.
Once the PROGRAMME SEQUENCE in-
dicator lamp of stage you wish to re-
peat starts flashing:
turn the programme selector switch
to the desired programme within a
period of 3 seconds.
Changing the programme sequence
19