Filter
Top Products
Installation
The tumble dryer is specially designed
for installation under a worktop.
This appliance is fitted with a protec-
tive coverplate which replaces the
machine lid. For reasons of electri-
cal safety this coverplate is necess-
ary and should not be removed.
Please note the following:
– The appliance should never be oper-
ated without the furniture front panel
in place.
– The electrical connection point
should be close to the appliance
and easily accessible.
– The slides provided with the ma-
chine are intended to prevent dam-
age to floor coverings when ma-
noeuvring the tumble dryer into
position.
– For installation under a work surface
900/910 mm or 950/960 mm from
the floor, one or two spacer frames are
required respectively.
Spacer frames complete with fitting in-
structions are available from Miele
Dealers and the Miele Spare Parts De-
partment.
Installation
35