Filter
Top Products
Activating and
storing in the memory
The programmable functions are acti-
vated using the additional option but-
tons in special combinations with the
programme selector to introduce
extra features not marked up on the
control panel.
1 Switch the machine off and shut the
door.
Turn the programme selector to the
“Finish” position.
2 Press the “Short” and “Low tempera-
ture” buttons at the same time.
Keep them pressed in and ...
3 ... switch the machine on by pressing
the “I-On/0-Off” button.
4 Release all the buttons.
–“P” will appear in the display.
– The “Drying” and “Cool air” indicator
lights will flash.
5 Turn the programme selector to one
of the following positions:
– COTTONS, extra dry
for programmable function 01:
correcting the drying level
– COTTONS, normal
for programmable function 03:
memory function
6 The number of the programmable
function will flash in the display, alter-
nating with the “P”.
Example:
0i0... P 0... 0i0... P 0... .
The number on the
right will show con-
stantly and means:
0 = programmable function
off
i = programmable function
on (the in-
dicator light “Machine iron” will also
come on.)
7 Press the “START” button to change
the number on the right from
0 to i =
on or from
i to 0 =
off.
8 If you wish to activate a further pro-
grammable function, repeat from
step
5. If not:
9 To store in the memory: turn the pro-
gramme selector to “Finish” and
switch the machine off using the
“I-On/0-Off” button.
To de-select a programmable func-
tion
Carry out steps 1 to 9.
To check whether a programmable
function is activated:
Carry out steps 1 to 6.
Switch the machine off.
This completes the check.
Programmable functions
23