Filter
Top Products
Stick the template down with ad-
hesive tape.
There are two ways of fixing the front
panel:
Option 1
Drill all the holes for the inner door
panel to the given depths. On chip-
board fronts: free holes (= dia. 10 mm),
inject the silicone sealant supplied into
the holes.
Loosen and remove the lower screw
of the upper hinge on the left and
right hand sides of the door (see illus-
tration).
With the screws supplied fix the front
panel by screwing through drill holes
1 and 2 of the inner door panel (see
template) – do not tighten.
Align the front panel.
Tighten the screws.
Fix the front panel with the rest of the
screws supplied and the hinge
screws.
Installation
37