Filter
Top Products
©2004 Maytag Appliances Company 16022904 Rev. 0 61
1.00 1. MONEY COUNTER OPTION
This option is either Selected "ON" or Not Selected "OFF."
00 Not Selected or "OFF."
0C Selected or "ON."
C0 Press
Delicates
keypad three consecutive times to select "ON" and three
consecutive times to remove (Not Selected) "OFF."
Reset counter by going from "OFF" to "ON." To select "ON" and not be
able to be deselected, first select "ON," then within two seconds, press
Delicates
twice,
Permanent Press
once, and shut the service access door.
Press
Permanent Press
keypad once to advance to next code.
2.00 2. SPECIAL PRICING OPTION.
This option is either Selected "ON" or Selected "OFF."
00 Not Selected or "OFF."
SP Selected or "ON." Press
Delicates
keypad once for this selection.
Steps "3." thru "9." codes are skipped if mode "2.00" is selected.
Press
Permanent Press
keypad once to advance to next code.
3.06 3. SPECIAL CYCLE PRICE
06 Represents the number of coins. See value of coin 1 and coin 2.
Adjustable from 00 to 39 by pressing the
Whites & Colors
keypad.
Presently set for six (6) quarters = $1.50.
Press
Permanent Press
keypad once to advance to the next code.
PR &PN MODELS ONLY: Presently set for 0 quarters.
4.05 4. SPECIAL DRYING MINUTES PER COIN
05 Represents the number of minutes per coin. Presently set for 5 minutes
per coin. Example: Six (6) quarters times (x) five (5) minutes = 30
minutes. Adjustable from 1-99 minutes, by pressing the
Whites & Colors
keypad.
Press
Permanent Press
keypad once to advance to the next code.
PN MODELS ONLY: Represnet the cycle length for free cycles. As example:
"730" represents 30 minutes.
5.00 5. MINUTES
00 This selection, "MINUTES," is the time of day clock. Select 00-59 minutes
by pressing
Whites & Colors
keypad.
Press
Permanent Press
keypad once to advance to the next code.
6.00 6. HOURS
00 This selection, "HOUR," is the of time of day clock in hours; using
military time (24 hour clock). Select from 00 to 23 by pressing the
Whites & Colors
keypad.
Press
Permanent Press
keypad once to advance to the next code.
CODE EXPLANATION