Filter
Top Products
©2004 Maytag Appliances Company 16022904 Rev. 0 21
Troubleshooting Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing, unless testing
requires power.
Single Dryer Troubleshooting Guide
Control
Does Not
Respond To
Program
Key Inputs
Enter service mode.
Does display contain
a diagnostic code?
Exit service mode.
Does the display
show "Select
Cycle"?
Does the keys work
in service mode?
Unplug dyer and check
membrane switch tail
connection to the board.
Plug the dryer back in..
See diagnostic code
troubleshooting guide
Unplug dryers and check
wiring and termination
between door switch and
control board.
If problem persists replace
membrane switch.
If problem
persists, replace
control board.
If problem persists,
replace control board.
Yes
No
No
Is the door shut? Close the door.
Yes
Yes No
Put the proper
number of coins
into the coin drop.
No
Does the help mode
show that the door is
shut?
Unplug the dryer , then
plug it back in.
If problem
persists, replace
control board.
Yes
Yes
Unplug dryer and check
continuity of the door
switch when the door is
opened and closed.
Does door switch
open and close
properly?
Adjust door switch
or replace it if
necessary.
No
No
Yes