Filter
Top Products
Cleaning the pump
The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or
spin;
• the appliance makes an unusual noise
during draining due to objects such as
safety pins, coins etc. blocking the pump.
• a problem with water draining is detected
(see chapter “What to do if...” for more
details).
Warning! Before opening the pump
door, switch the appliance off and
remove the mains plug from the
socket.
Proceed as follows:
1. Unplug the appliance.
2. If it is necessary, wait until the water has
cooled down.
3. Open the pump door levering on the
groove with a coin (or with the suitable
tool, that you can find in the bag
containing the instruction booklet
depending on the model).
1
2
4. Place a container close to the pump to
collect any spillage.
5.
6. Pull out the emergency emptying cap
from the filter cover, using pliers.
7. When no more water comes out,
unscrew the pump cover by turning it
anti-clockwise, using pliers, and remove
the filter. Always keep a towel nearby
to dry up any water spillage when
removing the cover.
Clean the filter under a tap, to remove
any traces of fluff.
1
2
29