Filter
Top Products
7
Getting started
Putting batteries in the remote control
The remote control needs two type AA batteries to power it. We have supplied these.
To replace the batteries
Turn the remote control on to its front face to reveal the battery compartment 1
cover (shown tinted in diagram below).
Push and pull the cover in the direction of the arrows on the cover and slide it off to 2
reveal the battery compartment.
Remove the two batteries from the compartment and put them to one side. (You 3
do not need to do this when you put batteries in for the first time.).
Insert the two AA size batteries following the diagram printed around the 4
compartments.
Put the cover on the guides of the compartment and slide it closed. You will hear it 5
snap closed.
Getting rid of the batteries
Make sure you get rid of the batteries safely. Never get rid of them in a fire or with
household waste. Check with your local authority for regulations on this.
Goodmans GDB20TTS_Instruction Manual.indb 7 6/15/2010 4:26:27 PM