Filter
Top Products
13
First time installation
How to turn the set-top box on for the first time
When you have connected your set-top box to the TV (as described in the previous
section), you are ready to use it.
Switch on the TV.1
Set it to the input channel you have connected the set-top box to (AV1, for 2
example).
Switch the set-top box on at the mains supply. 3
The power indicator on the front panel of the set-top box will light up red and will 4
change to green as a picture is displayed. The set-top box will automatically use
talking features to speak the setup instructions. You can switch this off by pressing
the TF button on your remote control.
This will be the ‘first-time installation’ title screen (shown above).5
Check your aerial is connected correctly and then press the OK button.6
You need to set up your receiver. Please make
sure the aerial is connected then press OK to continue.
Full scan replace existing services
CN Name Provider Type
No services stored
Please wait while scanning ... 9 minutes remaining
0% 100%
Goodmans GDB20TTS_Instruction Manual.indb 13 6/15/2010 4:26:29 PM