Goodmans GDB20TTS Clothes Dryer User Manual


 
Getting started
10
How to connect the set-top box to a TV set
If your TV has a SCART socket
Put your set-top box on a firm, level surface with at least a 10-centimetre gap 1
around all the sides and close to the TV you are going to connect it to.
Turn off the mains socket your TV is plugged into or pull the plug out of the socket.2
Take the aerial lead out of the TV and connect it to the ‘aerial’ connector on the 3
back panel of the set-top box.
Connect the RF cable (we have provided one) between the ‘RF out’ socket on the 4
set-top box and the aerial socket on the TV. This cable will allow you to watch TV
programmes as you did before but with the set-top box connected.
Connect a cable which has a ‘Scart’ connector at each end (we have provided 5
one) between the ‘TV’ socket on the back panel of the set-top box and the ‘Scart’
socket on your TV. If there is more than one ‘Scart’ socket on the TV, look in your
TV instruction manual to check which one you should use.
The set-top box will not work if you do not have the scart-to-scart cable 6
connected.
Plug the AC/DC adapter into a mains socket and then plug the connector on the 7
adapter into the ‘5V DC in’ connector on the back panel of the set-top box as
shown on page 11.
Plug the TV mains lead back into the mains socket.8
When your TV does not have a SCART socket
Connect as described above but ignore the Scart-to-Scart connection.
How to connect to a TV set and DVD recorder or VCR?
Put your set-top box on a firm, level surface with at least a 10-centimetre gap 1
around all the sides and close to the TV and DVD recorder or VCR you are going to
connect it to.
Turn off the mains socket your TV and DVD or VCR is plugged into or pull the plugs 2
out of the sockets.
Take the aerial lead out of the TV and connect it to the ‘aerial’ connector on the 3
back panel of the set-top box.
Goodmans GDB20TTS_Instruction Manual.indb 10 6/15/2010 4:26:28 PM