Filter
Top Products
available selections:
– MIN- low conductivity <300 micro S/cm
– MED - medium conductivity 300-600 micro S/cm
– MAX- high conductivity >600 micro S/cm
MED is set as default.
FULL TANK WARNING - ON/OFF
The container indicator at the end of the programme can be deactivated,
for example, if an external condensed water drain is installed.
1. Press OPTION button until FULL TANK WARNING selected.
2. Press OK to confirm - frame around bar indicator starts blinking.
3. Press OPTION until you set right status.
4. Press OK to confirm.
Warning is set to ON as default.
Technical data
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
technical data electrolux 53