Filter
Top Products
The Pro Steam programme is automatically followed by an anti-crease
phase, including brief steam phases, which lasts around 30 minutes.
The drum rotates during the anti-crease phase. This keeps the laundry
loose and free of creases. It can be removed at any time during the anti-
crease phase, except during steam injection phases (look for STEAM IN-
JECTION message in the display !). Laundry should be removed as quickly
as possible.
1. Open the loading door to remove the laundry.
2. Before removing the laundry, remove fluff from the micro-fine filter. It is best to
use a damp hand for this purpose. (See “Care and cleaning” chapter.)
3. Remove laundry one garment at a time.
To retain the effects of the Pro Steam treatment, clothes must be removed
one garment at a time during the anti-crease phase and hung immediately
on a clothes hanger to dry (for at least 5-15 mins, depending on fabric and
selected steam level). Do up the buttons and tug the garment into shape,
paying particular attention to cuffs and seams.
4. Turn the programme knob to OFF.
After each drying cycle
– Clean the micro-fine filter and fine filter
– Drain the condensed water container if you do not use water recirculation
system (See chapter “Care and Cleaning”.)
5. Close door.
30 electrolux