Filter
Top Products
It is normal for the appliance to make noises during a Pro Steam or drying
programme if garments with hard parts, such as metal buttons, are put in
the drum.
Changing a programme
To change a programme which has been selected by mistake once the programme
has started, first turn the programme selector to OFF and then reset the programme.
The programme can no longer be changed directly once the programme
has started. If you nevertheless attempt to change the programme with the
programme knob the following message is shown:
Please turn programme selector to the last used position.
The drying programme is not however affected by this.
Putting in extra items or taking items out before end of programme
1. Open loading door.
Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4. Press the START PAUSE button to continue the drying cycle.
Pro Steam programme complete / removing laundry
After the Pro Steam cycle is completed , 0:00 starts flashing and alternatively the
messages: Finished. Please remove the laundry and Anti-crease appear in the dis-
play. If the buzzer has been activated, an audible signal sounds at regular intervals.
electrolux 29