Check the correct positioning of o-ring gasket before screwing back the door light
cover. Do not operate the dryer when missing o-ring gasket on door light cover.
For safety reasons, the cover must be screwed down tightly. If this is not
done, the dryer must not be operated.
Machine settings
The special options that can be set under SETTINGS remain permanently stored
independent of each drying cycle – even after the appliance has been switched off
or the mains plug has been removed from the socket.
To enter the settings:
1. Press OPTION button repeatedly until selection frame marks SETTINGS.
2. Press OK button to confirm.
3. Use OPTION button to scroll through the list.
After few seconds of inaction settings view comes back to main view.
You can get back to previous view each time if you select Back and confirm OK.
LANGUAGE
Zurück
EINSTELLUNGEN
SPRACHE
UHR
DEU
50 electrolux