Filter
Top Products
Selecting the programme
Use the programme selector to set the programme you require. The estimated pro-
gramme duration (in hours and minutes) appears in the multi-display as well as cycle
finish time.
Setting DRYNESS LEVEL
If laundry comes out of the machine too damp after a standard drying programme,
you can increase the drying result by using the DRYNESS LEVEL (Dampfmenge)
function. Laundry becomes drier as you move from MIN to MAX.
Press the DRYNESS LEVEL (Dampfmenge) button repeatedly until the desired
dryness level (MIN, MED or MAX) is shown in the display. When humidity adjust-
ment is not foreseen on the related program, message Not Selectable is shown.
If wool or silk comes out of the machine too damp at the end of a WOOL (Wolle) or
SILK (Seide) programme, you can dry it again by restarting the appropriate pro-
gramme, this time with the DRYNESS LEVEL (Dampfmenge) function selected and
dryness level MIN, MED or MAX. In the case of a drying cycle with relatively dry
laundry, the end of the programme cycle displayed at the beginning is corrected
after a while.
Make sure that by selecting the DRYNESS LEVEL (Dampfmenge) function,
you do not over-dry your wool or silk.
Selecting additional options
The additional options available for the Pro Steam programmes are LONG ANTI-
CREASE, BUZZER, SPIN SPEED
2)
and the CHILD LOCK.
1. By turning the knob choose a Pro Steam programme.
2. To set the option press OPTION button. you will see available options on the
screen.
3. Press repeatedly OPTION button to select proper option. Selection is marked
by rectangular border.
4. Press OK button to activate it. Suitable icon should appear on the right side of
the screen.
To deselect an option follow the same steps. Option icon should disappear.
2) available with cotton/easy care and cotton/synthetic shirts programmes
34 electrolux