Filter
Top Products
At the end of the programme
The machine stops automatically and three flashing zeros are displayed.
The END and spin speed pilot lights, as well as the pilot light(s) corre-
sponding to the selected option(s), stay on.
If the RINSE HOLD option has been selected, the corresponding pilot
light on the programme progress display flashes to indicate that the
water must be emptied out before opening the door.
The pilot light of the START button flashes and tree flashing zeros are
displayed.
Release of the lock is indicated by an audible signal.
Switch the machine off by pressing the ON/OFF button.
Turn the programme selector dial to RESET.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid a subsequent wash being
damaged by any forgotten items.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
30
How to wash