Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
AJ0976
10
Anchoring and Leveling Press
Refer to Figure 3.
Figure 3
1. Place machine in desired location.
2. Trace the 6anchoring holes onto the floor.
3. Move the press aside.
4. Drill the floor in all 6 places with a masonry bit
so that it will accept the 5/8"-11 expansion
anchors.
5. Insert 5/8"-11 expansion anchors into holes.
6. Using 5/8"-11 Grade 5 expansion bolts, expand
each anchor by turning the bolt into the anchor
until the bolt is secure and the anchor is fully
expanded.
7. Remove the bolts and reposition the machine
over the anchors.
IMPORTANT: Leveling the press is required.
Failure to follow leveling instructions can cause
misalignment of heads and buck and damage to the
press and garments, as well as void warranty.
8. Place a level across carriage rails at A and adjust
left end leveling bolts. Refer to
Figure 3.
9. Move level to location B and adjust right end
leveling bolts. Refer to
Figure 3.
CAB85N
CAB85N
REMOVE ACCESS PANEL
TO INSTALL CENTER
LEVELING BOLT
RIGHT
LEVELING BOLTS
LEFT END
LEVELING BOLTS
CENTER
LEVELING BOLTS
A
C
B
CENTER
LEVELING BOLTS