Filter
Top Products
33 / EN
Washing Machine / User’s Manual
4.6.13 Child Lock
Use Child Lock function to prevent children from tampering with the product. Thus you can
avoid any changes in a running programme.
C
You can switch on and off the product with On / Off button when the Child Lock is active. When you
switch on the product again, programme will resume from where it has stopped.
Machine will give an audio alarm when the buttons are pressed if the child lock is active. The audio
warning will repeat for maximum 5 times. If the buttons are pressed more than 5 times, no audio
warning will be given.
To activate the Child Lock:
Press and hold 2nd auxiliary function button for 3 seconds. After the countdown as “CL
3-2-1” on the display is over, child lock indicator will be lit. After the indicator is lit, stop
pressing 2nd Auxiliary Function button.
To deactivate the childproof lock:
Press and hold 2nd auxiliary function button for 3 seconds. After the countdown as “CL
3-2-1” on the display is over, child lock indicator disappears from the display.
4.6.14 Cancelling the programme
The programme is cancelled when the product is turned off and on again. Press and hold
On / Off button for 3 seconds. After the countdown as "3-2-1" on the display is over, the
machine turns off.
C
If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You
should cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to
open the loading door since the water level in the product is above the loading door opening, then turn
the Programme Selection knob to Pump+Spin programme and discharge the water in the product.
4.6.15 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the product will turn off automatically.
Display and all indicators will turn off.
Completed programme steps will be displayed if you press On / Off button.
4.6.16 Adjusting the VOLUME level
Low volume and high volume
Press and hold Auxiliary Function button 3 for 3 seconds to adjust the volume level. After
the countdown as "3-2-1" on the display is over, the volume level symbol will appear and
the new volume level will be displayed.