Filter
Top Products
30 / EN
Washing Machine / User’s Manual
• Rinse Hold
If you are not going to unload your clothes immediately after the programme completes,
you can use rinse hold function to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water in the product. Press Start/
Pause button after this process if you want to drain the water without spinning your
laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start /
Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is
completed.
• Night Mode
Use to wash the cottons with lesser energy consumption and silently. Spin steps are
cancelled for a silent washing and the cycle ends with the Rinse Hold step. After
completion of the programme, run Spin cycle to spin the laundry.
Time display
Remaining time for the completion of the programme while it is running is displayed as
“01:30” in hours and minutes format.
C
Programme time may differ from the values in the "Programme and consumption table" depending on
the water pressure, water hardness and temperature, ambient temperature, amount and the type of
laundry, auxiliary functions selected and the changes at the mains voltage.
4.6.9 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours.
After pressing End Time button, the programme's estimated ending time is displayed.If the
End Time is adjusted, End Time indicator is illuminated.
1888
88:88
88
C
0
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary
functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator
illuminates.
4 Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end
time on the display starts flashing.
1888
88:88
88
C
0