Filter
Top Products
6
SECTION II
SPECIFICATIONS/DIMENSIONS
A. SPECIFICATIONS
NOTE: ADC reserves the right to make changes in specifications at any time, without notice or
obligation.
MAXIMUM CAPACITY (DRY WE IGHT) 460 lbs. 208.66 kg
Total Weight 10,500 lbs. 4,762.7 kg
Total Shipping Weight 10,800 lbs. 4,898.8 kg
Tilt Height 137-1/4" 348.6 cm
Operating Height 114-1/2" 290.83 cm
Full Tilt Depth 117-1/2" 298.45 cm
Operating Depth 95" 241.3 cm
Width 122" 309.88 cm
Tilt Load (REAR TILT ) 15º
Tilt Unload (FRONT T ILT) 15º
Loading Height from Floor 65-5/8" 166.69 cm
Tumbler (BASKET) Diameter 69-1/8" 175.58 cm
Tumbler (BASKE T) Depth 80-5/16" 203.99 cm
Tumbler (BASKE T) Volume 175 cu. ft. 4.96 cu. m
Minimum Load Size 250 lbs. 113.4 kg
Maximum Load Size 460 lbs. 208.66 kg
Blower Motor 25 HP 18.64 kw
Tumbler (BASKET) Motors (2 MOTORS) (2) 5 HP (2) 3.73 kw
Boiler Horsepower 60 Bhp
Steam Inlet Size Connection 2-1/2" N.P.T. ---
Burner Blower Motor 1-1/2 HP 1.12 kw
Blower Maximum Airflow 13,000 cfm 368 cmm
Maximum Duct Back Pressure 1.25" W.C. 3.1 mbar
Minimum Duct Diamemter 24" 60.96 cm
Compressed Air Pressure Required 80 psi (±10 psi) 551.6 kpa (±68.95 kpa)
Compressed Air Volume Required 20 cf/hr .57 cm/hr
Compressed Connection 3/8" N.P.T. ---
Shaded areas are stated in metric equivalents