Filter
Top Products
44 American Dryer Corp. 113217-5
MONTHLY
Empty the compressed air filter bowl.
EVERY 3 MONTHS
Clean lint accumulation from the gas valve/burner area at the top of the dryer, the fan (impellor) motor, and the fan/
impellor bearings located in the dryer’s base.
NOTE: To prevent damage, avoid cleaning and/or touching ignitor/flame-probe assembly.
EVERY 6 MONTHS
Check fan (impellor) and drive motor V-belts for tightness and wear. Retighten and replace if required.
STEAM MODELS – Clean the steam coil fins. We suggest using compressed air and a vacuum cleaner with brush
attachment.
NOTE: When cleaning steam coil fins, be careful not to bend the fins. If fins are bent, straighten by using a fin
comb, which is available from local air-conditioning supply houses.
Inspect and remove lint accumulation in customer furnished exhaust ductwork system and from dryer’s internal exhaust
ducting.
CAUTION: THE ACCUMULATION OF LINT IN THE EXHAUST DUCTWORK CAN
CREATE A POTENTIAL FIRE HAZARD.
NOTE: DO NOT OBSTRUCT THE FLOW OF COMBUSTION AND VENTILATION AIR. CHECK
CUSTOMER FURNISHED BACK DRAFT DAMPERS IN THE EXHAUST DUCTWORK.
INSPECT AND REMOVE ANY LINT ACCUMULATION, WHICH CAN CAUSE THE
DAMPER TO BIND OR STICK.
NOTE: When cleaning the dryer cabinet(s), avoid using harsh abrasives. A product intended for the cleaning
of appliances is recommended.