American Dryer Corp. AD/ML-310 Clothes Dryer User Manual


 
113217-5 www.amdry.com 41
SECTION V
WARRANTY INFORMATION
A. RETURNING WARRANTY CARDS
Before any dryer leaves the ADC factory test area, a warranty card is placed on the back side of the main door glass.
These warranty cards are intended to serve the customer where we record the individual installation date and warranty
information to better serve you should you file a warranty claim.
If a warranty card did not come with your dryer, contact the ADC Warranty Department or ADC Service Department
at +1 (508) 678-9000.
IMPORTANT: A separate warranty card must be completed and returned for each individual dryer.
NOTE: Be sure to include the installation date when returning the warranty card(s).
B. WARRANTY
For a copy of the ADC commercial warranty covering your particular dryer(s), contact the ADC reseller from whom
you purchased the equipment and request a dryer warranty form. If the reseller cannot be contacted or is unknown,
warranty information can be obtained from the factory by contacting the ADC Warranty Department at +1 (508)
678-9000.
NOTE: Whenever contacting the ADC factory for warranty information, be sure to have dryer’s model
number and serial number available so that your inquiry can be handled in an expeditious
manner.
C. RETURNING WARRANTY PARTS
ALL dryer or parts warranty claims or inquiries should be addressed to the ADC Warranty Parts Department at
+1 (508) 678-9000. To expedite processing, the following procedures must be followed:
1. No parts are to be returned to ADC without prior written authorization (“Return Material Authorization” [R.M.A.])
from the factory.
NOTE: An R.M.A. is valid for only thirty (30) days from date of issue.
The R.M.A. issued by the factory, as well as any other correspondence pertaining to the returned part(s), must be
included inside the package with failed merchandise.