Filter
Top Products
38 American Dryer Corp. 450268-1
TUMBLER ALIGNMENT (LATERAL)
1. Discontinue power to the dryer.
2. Remove the back guard.
3. Loosen the two (2) hex head bolts, (one [1] turn is enough), that holds the pillow block bearing to the
bearing box.
4. Back off the two (2) jam nuts on the side adjustment bolts. Now, rotate the tumbler from the front of
the dryer, checking the space between the tumbler and the front panel. This should be equal on the
left hand and right hand side.
5. Lateral adjustment (viewing from the rear).
a. Loosening (by turning counterclockwise) the left hand adjustment bolt and tightening (by turning
clockwise) the right hand adjustment bolt will shift the tumbler to the right.
b. Loosening (by turning counterclockwise) the right hand adjustment bolt and tightening (by turning
clockwise) the left hand adjustment bolt will shift the tumbler to the left.
6. Tighten and secure both adjustment bolts and jam nuts.
7. Tighten the bearing box bolts.
8. Replace the back guard and reestablish power to the dryer.